Sinsemilla This is a very strong form of marijuana which, like skunk , contains high levels of ‘tetrahydrocannabinols’ (THC’s). These are responsible for a range of effects such as euphoria, Growing weed in an AeroGarden: the complete step by step guide with everything you need to know along with pro-tips by experimented growers. Скачайте фото Мужское Растение Каннабиса С Семенами Стручки Изолированы Над Белым прямо сейчас. И найдите в библиотеке роялти-фри стоковых изображений iStock еще больше фотографий Cannabis sativa, доступных для простого и быстрого скачивания.
This is a very strong form of marijuana which, like skunk, contains high levels of ‘tetrahydrocannabinols’ (THC’s). These are responsible for a range of effects such as euphoria, talkativeness, increased sociability, hunger pangs (also known as ‘the munchies’) and hallucinations.
What is sinsemilla?
This refers to a female cannabis plant which does not have any seeds. This word can be split into two: ‘sin’ (without) and ‘semilla’ (seeds).
So, ‘sinsemilla’means ‘no seeds’.
If a female marijuana plant is not fertilised then it will produce large amounts of resin which was designed to trigger fertilisation. However, cannabis resin contains high levels of THC’s.
Female cannabis plants which have not been fertilised will contain ‘fake’seed pods with high percentages of THC’s which is the desired goal for some growers.
These pods contain ‘pistils’ –the seed bearing part of the plant which change colour during growth before withdrawing into the pods.
Once they have done so the plant is ready to be harvested.
So, if a female cannabis plant has not been fertilised by a male plant and is allowed to mature then it will not produce any seeds. If there is no sign of these throughout its growth then it is said to be a sinsemilla plant.
Sinsemilla plants have some of the highest levels of THC’s.
How is sinsemilla grown?
This is usually grown indoors, under greenhouse conditions, and using hydroponic techniques.
One reason for this is that it is relatively easy for a male cannabis plant to fertilise a female cannabis plant if grown outdoors. So, growing sinsemilla indoors reduces the risk of this happening.
A sinsemilla plant contains a high percentage of THC’s, often around 10% or more. This figure increases to 20, 25 or even 30% if grown using hydroponic techniques.
This can be added to tobacco and smoked as a ‘spliff’ or smoked on its own. Another option is to smoke sinsemilla using a ‘bong’ (a water pipe).
Effects of sinsemilla
This causes similar effects to those of skunk. People who smoke sinsemilla find that they experience a state of elation, heightened awareness of colour, sound and textures and an increased appetite.
How to Grow Weed in your AeroGarden
Miracle-Gro AeroGarden™ is an exciting hydroponic system. You can grow fresh herbs, lettuce, tomatoes, year-round, in the comfort of your home.
You may be wondering: Is it possible to grow weed in an AeroGarden? And is it worth it? The short answer is Yes.
In this guide, I’m going to show you everything you need to know to grow weed your AeroGarden™ successfully including the best practices, the material needed, and exclusive pro-tips by experimented growers.
The best part? It will pay for itself in only 2 or 3 grows in weed value!
Table of contents
1. The Best AeroGarden Models For Weed
At the time I wrote these lines, the available models are; Sprout, Harvest, Classic, Bounty, and Farm family. To grow weed successfully, you will need a garden with 24 inches of growing height capacity and a powerful grow light panel.
So here are the AeroGarden models I recommend:
The AeroGarden™ Classic 9 is one of the most powerful models. It comes with a 45-watt LED full spectrum growth light and a growing height extendable up to 24 inches.
The Classic 9 also includes a touch screen control panel that makes things very easy and fun to control!
Classic 9 Bounty model has been replaced recently by a new design and this one is now obsolete but still one of the best to grow weed.
The most recent AeroGarden Bounty comes with a 40-watt grow light. The Bounty Elite (WiFi and Alexa Compatible) comes with a 50-watt grow light and both have 24 inches of growing height capacity.
Finally, the bigger models available are the AeroGarden™ Farm family with 60W of dual LED power and 24 inches of growing height.
2. Weed strain and seed type for the AeroGarden
Since the maximum grow height is only 24 inches (when the LED panel is fully deployed), it’s crucial to choose a strain that will stay small and compact.
Some strains can grow big plants that are not suited for the AeroGarden small reservoir. The strains also determine the effects and medical attributes.
2.1 Cannabis seed types
Autoflowering seeds are perfect for beginners because they grow very quickly and stay smaller. Also, there’s no need to change the light cycle to induce the flowering stage, and you will get only female plants.
Some strains can take only 10 weeks from seed to harvest.
On the other hand, yields are usually smaller with autoflowering seeds and most have a lower THC percentage.
Feminized seeds are also great, they allow growers to apply training techniques that aren’t recommended for auto and they can be cloned.
You will have to change the light cycle from 18/6 to 12/12 to trigger the flowering phase. Increased darkness hours tell the plant the fall is coming and start creating buds.
Key takeaway: Feminized seeds give more control to the experienced grower while autoflower seeds grow faster and are suitable for beginner grower.
2.2 Recommended marijuana strains for the AeroGarden
– (Hybrid) – (Hybrid) – (Indica) – (Indica) – (Hybrid) – (Hybrid) – (Hybrid) – (Hybrid) – (Indica) – (Hybrid) – (Hybrid)
3. The shopping list
Now you have your AeroGarden™ and your seeds, you will need the material below, and the optional list will help to have more yield out of your grow.
3.2 Optional products
Cannabis, like any other plants, needs calcium and magnesium.
Your tap water may have calcium and magnesium in small concentrations, but likely not enough.
If you’re using distilled water, you will need to add a Cal-Mag solution to your water as they are essential secondary nutrients for healthy plant growth.
Botanicare Hydroguard® is well known for their unique beneficial bacteria that help to increase root mass and health.
In my installation, I have added an external air pump with an air stone to make more bubbles in the root zone. This helps to prevent roots rot, and bring more oxygen to the roots.
The external pump also helps to reduce the usage of the AeroGarden™ built-in pump. The water temperature will stay low, and you will be able to keep an optimal temperature (between 65 and 80 degrees Fahrenheit).
On the top of the AeroGarden reservoir, you will find two water/air ports with rubber plugs that you can remove.
They are the same size as the standard aquarium airline tubing. Just place the tubing inside one of them and put the air stone in the center of the bowl.
4. Nutrients and the importance of pH
Important: don’t use the provided plant food that comes with the AeroGarden™. This will not work, and you will lose your time and seeds.
I use General Hydroponics Flora Series, and I always have great results with these nutrients. Some other popular alternatives are Advanced Nutrients and Botanicare.
Your AeroGarden™ Bounty holds approximately 4 liters of water. I pour this amount of water into a big stainless steel mixing bowl. Let the tap water sit for 24 hours to become chlorine-free or use distilled water.
Now it’s time to add nutrients to the water. Begin with half of the recommended dosage by the manufacturer.
If you’re using GH Flora Series, take a look at this fully-tested nutrient schedule.
4.1 pH control
The pH scale ranges from 0 to 14. The pH of the AeroGarden™ solution should be between 5.5 and 6.5.
So I target 6, and I check with the pH pen tester every day and make the required adjustments with pH buffers (do not use pH up and pH down in the same solution).
In the vegetative phase, the pH tends to go higher, and in the flowering stage, it tends to go lower. Keeping the pH in the target zone is essential. Out of this zone, the cannabis plant may be unable to absorb some nutrients, and this leads to nutrient deficiencies.
If the pH fluctuates a lot or is out of control for a long time, your plant leaves will become distorted especially in the new growth areas.
This can be reverted, but the affected leaves will not return to normal appearance.
Key takeaway: pH problems can slow the growth of your cannabis plants and lower your yield.
4.2 Total dissolved solids (TDS) & parts per million (PPM)
Before pouring the solution into the AeroGarden’s bowl, you need to verify the concentration of nutrient in the solution with the TDS digital meter.
In the first weeks, the PPM should be around 400, and this amount increase as the marijuana plants grows. In the early flowering stage, the TDS could be around 1000+ PPM.
High nutrient concentration levels will not help the plant to grow faster and can lead to problems like nutrient burn.
5. AeroGarden setup to grow weed
Now the fun part! I assume you have already assembled your hydroponic system and you have transferred the solution to the AeroGarden reservoir.
Now let’s take a closer look at the control panel. First, set the clock, and if you’re in the quick plant menu, select the grow anything option.
5.1 Grow light settings
Select the sun icon, and follow the steps to configure the grow light. If you have autoflowering seeds, I recommend 20/4 light cycle. My settings are as follow; light open at 6:00 am, and close at 2:00 am.
For feminized seeds, I suggest 18/6 for the vegetative stage, then switch to 12/12 to trigger flowering stage.
5.2 AeroGarden™ Pump settings
Select the water icon, and then change settings. Follow the steps until you reach the pump on/off screen.
In the vegetative stage, I recommend setting the pump 30 minutes on, and 60 minutes off.
In the flowering stage, it’s better to give an oxygen boost in the water for the increasing root masse of your plants. So, if you don’t have an external pump, set the pump to 60 minutes on, and 30 minutes off.
If you have the external air pump with an air stone, keep in mind this one should run all the time from seed to harvest. You can configure the AeroGarden built-in pump 10 minutes on, and 60 minutes off when you run the external pump.
5.3 Nutrients settings
Finally, select the nutrients icon, and then settings. Set your nutrients cycle to 7 days. This is a simple reminder, and the AeroGarden™ will give you a warning every week to add nutrients and replace the water.
6. Seed germination
I strongly recommend growing only one or two plants at a time. Your marijuana plants will need an increased amount of space while growing and try to put more plants will decrease the yield.
Take two grow sponges and baskets, then place the seeds into the small holes. Be sure seeds are not falling too deep, (1/2” would be awesome). Cover the two pods with the provided transparent domes and put duct tape over the remaining pod holes.
From my experience, it could take anywhere from 2 to 4 days to see the first tiny sprout.
Мужское растение каннабиса с семенами стручки изолированы над белым – Сток картинки .
Что такое «лицензия роялти-фри»? Лицензии роялти-фри позволяют вам осуществить единовременную оплату за постоянное использование защищенных авторскими правами изображений и видеоклипов в личных и коммерческих проектах без необходимости дополнительных платежей за каждое их использование. Это обоюдовыгодный вариант, и именно поэтому все материалы iStock (включая все изображения и видеоматериалы Cannabis sativa) доступны только по лицензиям роялти-фри. Какие виды файлов роялти-фри доступны на iStock? Лицензия роялти-фри — оптимальный вариант для тех, кто намерен использовать стоковые изображения в коммерческих целях, поэтому все файлы на iStock (фотографии, иллюстрации и видеоклипы) предлагаются только на условиях роялти-фри. Как можно использовать изображения и видеоклипы роялти-фри? Вы можете изменять вид, размер и параметры любых материалов iStock (включая все изображения и видеоматериалы Cannabis sativa) в соответствии с потребностями своих проектов — от рекламы в социальных сетях до рекламных щитов, от презентаций PowerPoint до художественных фильмов. За исключением фотографий «только для редакционного использования» (которые можно использовать только в редакционных проектах и нельзя изменять), ваши возможности безграничны.